Skip to content

Vanish LED Neon Flex

VA0410S FAQ

4 × 10 mm side-bend neon at 8 W/m, 24 V DC, CRI > 90, in single colour 2200–6500 K, tunable white 2700–6500 K and RGB.

What is the VA0410S LED neon strip?

VA0410S is the slimmest LED neon flex in the Vanish line, 4 × 10 mm in cross-section, and bends sideways with a 75 mm bend radius. It runs at 8 W/m on 24 V DC with CRI > 90 and SDCM < 3, is rated IP65 / IP67, and comes in single colour from 2200K to 6500K, tunable white 2700–6500K and RGB.

How bright is the VA0410S neon light strip?

It is a low-output line: 191 lm/m at 2200K up to 278 lm/m at 5000K, at 8 W/m, with 252 lm/m at 3000K and efficacy up to 35 lm/W. Tunable white gives 204 lm/m and RGB 72 lm/m with all channels on. For more light from the Vanish line, the larger VA1225RS reaches 959 lm/m at 5000K.

Can the VA0410S neon strip lights be cut and joined?

Yes, at the marked cut points every 50 mm. Standard lengths are 1004 / 2004 / 3004 / 4004 / 5004 mm, one run reaches 5 m, and the cable can exit at the front, side, bottom or a closed end. A cut end must be resealed with a silicone or integral end cap to keep the IP65 / IP67 rating.

What driver does the VA0410S need?

A 24 V DC constant-voltage LED driver, plus a controller for the tunable white and RGB versions. The strip draws 8 W/m, so add up the metres on each driver and keep the load at or below 80 % of the driver's rated power. Keep each run within the model's 5 m maximum and feed longer lines at several points.

More product questions

Another question about this product?

Send us the project details and our team will answer with the datasheet and a sample offer.