Skip to content

Ultra Long-Run 24 V & 48 V LED Strip

AH2835-48V-168-10mm FAQ

Even brightness over long runs.

What is the AH2835-48V-168-10mm 48V LED strip?

A 48 V strip from the Ultra series, which is made to keep its brightness consistent over long runs. It has 168 2835 LEDs per metre on a 10 mm board at 12 W/m, CRI > 90 and SDCM < 3, in eight colour temperatures from 2200K to 6500K, and reaches 128 lm/W (1569 lm/m) at 5000K.

Why use a 48V LED strip like the AH2835-48V-168-10mm instead of 24V?

Because current is I = P / V: at the same power a 48 V strip draws half the current of a 24 V one, so less voltage is lost along the copper and brightness stays more even from the feed end to the far end. The catalogue lists 5 m as this model's maximum run per feed; ask Artcolor to confirm longer runs for a specific project.

What LED strip power supply does the AH2835-48V-168-10mm need?

A 48 V constant-voltage LED driver. Size it with about 20 % headroom: multiply 12 W/m by the installed length and keep that load at or below 80 % of the driver's rated power. A 24 V driver cannot run this strip, and a 12 V or 24 V strip must never be connected to a 48 V driver.

Where can the AH2835-48V-168-10mm be cut?

Every 83.33 mm, at the marked cut points. Each segment holds 14 LEDs running on the full 48 V, so the cut is coarser than on 24 V strips; that is the trade-off for even brightness over long runs. A cut IP65, IP67 or IP68 version must be resealed to keep its rating. The strip bends to a 60 mm radius.

More product questions

Another question about this product?

Send us the project details and our team will answer with the datasheet and a sample offer.