Can the AA2835-24V-240-10mm SnipX strip be cut at every LED?
Yes — every 4.17 mm. Each of its 240 LEDs per metre is a segment of its own on 24 V, so a run can be cut after any LED and fitted to its space almost exactly, with no dark gap left at the end of a shelf or cove. Cut only at the marked cut points.
Where do you cut the AA2835-24V-240-10mm LED strip?
At the marked cut point beside each LED, straight across the middle of the copper pads, so each side keeps half a pad to connect to. Switch off the power first and choose the nearest mark at or below the length you need. A cut IP65, IP67 or IP68 version must be resealed with matching end caps and sealant to keep its rating.
How bright is the AA2835-24V-240-10mm cuttable LED strip?
At 20 W/m it gives 2419 lm/m at 2700K, 2483 lm/m at 3000K and 2742 lm/m at 4000K, up to 2800 lm/m (139 lm/W) at 5000K. Its 240 LEDs per metre sit on a 10 mm board, with CRI > 90, SDCM < 3 and a 118.6° beam angle, in colour temperatures from 1800K to 6500K.
What driver does the AA2835-24V-240-10mm need?
A 24 V constant-voltage LED driver. At 20 W/m it is the highest-power SnipX strip, so size the driver from the installed length: multiply 20 W/m by the length and keep that load at or below 80 % of the driver's rated power. The catalogue rates the strip at up to 5 m per feed.
Another question about this product?
Send us the project details and our team will answer with the datasheet and a sample offer.