Skip to content

PrimCore 2835 LED Strip, 12 V & 24 V

AS2835-12V-120-8mm FAQ

Simple, universal and cost-effective.

What is the AS2835-12V-120-8mm 12V LED strip?

A 12 V PrimCore strip with 120 2835 LEDs per metre on an 8 mm board at 14.4 W/m. It has CRI > 90 and SDCM < 3, comes in eight colour temperatures from 2200K to 6500K, and gives 1367 lm/m at 2700K, 1444 lm/m at 3000K and 1502 lm/m at 4000K. It suits short runs and installations that already work on 12 V.

24V vs 12V LED strip: how does the AS2835-12V-120-8mm compare with the 24 V version?

Both have 120 LEDs per metre, 14.4 W/m and an 8 mm board, but at the same power the 12 V strip draws twice the current (I = P / V), so it loses more voltage along a run. In return it cuts every 25 mm instead of 50 mm. Choose the AS2835-24V-120-8mm for longer lines, and the 12 V strip where finer cutting or an existing 12 V supply matters.

What 12V power supply does the AS2835-12V-120-8mm LED strip need?

A 12 V constant-voltage LED driver, sized with about 20 % headroom so the strip load is no more than 80 % of the driver's rated power. Work out the load as 14.4 W/m times the installed length, then divide by 0.8 to find the minimum driver rating. A 24 V or 48 V driver must not be used on this strip.

How long can the AS2835-12V-120-8mm run, and where can it be cut?

The catalogue rates this model at up to 5 m per feed, in line with the general guide of about 5 m for a single-end feed at 12 V; feeding from both ends or the middle nearly doubles that. It cuts every 25 mm at the marked cut points, and a cut waterproof version must be resealed to keep its IP rating.

More product questions

Another question about this product?

Send us the project details and our team will answer with the datasheet and a sample offer.