Skip to content

ArmorCore High CRI LED Strip

AN3030-24V-84-10mm FAQ

Built for EMC-bracket and PCT LEDs.

What is CRI, and what CRI does the AN3030-24V-84-10mm have?

CRI, the colour rendering index, compares how a light source renders a set of test colours with a reference light; 100 is the maximum. The AN3030-24V-84-10mm is rated CRI > 90 with SDCM < 3, using Nichia 3030 LEDs at 84 per metre on a 10 mm board, at 14.4 W/m on 24 V.

Is the CRI > 90 of the AN3030-24V-84-10mm high CRI LED strip enough for retail and exhibition lighting?

CRI > 90 is a good first filter, but the general index leaves out the saturated red sample, R9. As a guide, R9 should reach at least 50, and 90 or more for retail and exhibition work. The catalogue does not list R9 for the AN3030-24V-84-10mm, so ask Artcolor for it, or consider the CRI > 95 SL3030-24V-84-10mm, before approving a sample.

How warm can the AN3030-24V-84-10mm go?

Down to 1800K, which gives 1150 lm/m (80 lm/W). It also comes in 2200K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K; output rises to 1617 lm/m at 2700K, 1781 lm/m at 3000K and 1991 lm/m (138 lm/W) at 5000K, all at 14.4 W/m.

Where can the AN3030-24V-84-10mm high CRI LED tape be cut?

Every 83.33 mm, at the marked cut points, with seven LEDs in each segment. It bends to a 60 mm radius, has a 118.2° beam angle and is rated at up to 5 m per feed. A cut IP65, IP67 or IP68 version must be resealed to keep its rating.

More product questions

Another question about this product?

Send us the project details and our team will answer with the datasheet and a sample offer.