What is the AH2835-24V-120-12mm 24V LED strip?
The 24 V strip of the Ultra series, which is made to keep its brightness consistent over long runs. It has 120 2835 LEDs per metre on a 12 mm board at 9.6 W/m, CRI > 90 and SDCM < 3, in eight colour temperatures from 2200K to 6500K, with efficacy up to 109 lm/W at 5000K.
Is the AH2835-24V-120-12mm suitable for LED cove lighting?
Yes. Ultra is made for continuous lighting in large areas with less cutting and splicing, which is what a long cove needs. At 9.6 W/m the AH2835-24V-120-12mm gives 878 lm/m at 2700K, 927 lm/m at 3000K and 967 lm/m at 4000K, with a 117° beam angle and a 60 mm bend radius.
How long can the AH2835-24V-120-12mm run from one feed?
Up to 5 m per feed, as the catalogue rates this model. For longer coves and lines, feed each section separately or feed the run from both ends. Use a 24 V constant-voltage LED driver and keep the load, 9.6 W/m times the installed length, at or below 80 % of the driver's rated power.
Where can the AH2835-24V-120-12mm be cut?
Every 50 mm, at the marked cut points across the copper pads; a cut anywhere else leaves that segment dark. A cut waterproof version (IP65, IP67 or IP68) must be resealed with end caps and sealant, because the IP rating belongs to the finished construction, not the bare board.
Another question about this product?
Send us the project details and our team will answer with the datasheet and a sample offer.