Can you cut the AS2835-24V-120-8mm 24V LED strip?
Yes — every 50 mm, at the marked cut points across the copper pads. Each 50 mm segment holds six of the strip's 120 LEDs per metre and runs on the full 24 V, so a cut anywhere else leaves that segment dark. A cut IP65, IP67 or IP68 version must be resealed with end caps and sealant to keep its rating.
What is a 2835 LED strip, and how bright is the AS2835-24V-120-8mm?
A 2835 strip uses surface-mount LEDs in a 2.8 × 3.5 mm package. The AS2835-24V-120-8mm carries 120 of them per metre on an 8 mm board at 14.4 W/m, giving 1374 lm/m at 2700K, 1470 lm/m at 3000K and 1509 lm/m at 4000K, up to 1555 lm/m (108 lm/W) at 5000K, with CRI > 90 and SDCM < 3.
How long a run can the AS2835-24V-120-8mm 24V LED tape cover?
Up to 5 m per feed, as the catalogue rates this model. At the same 14.4 W/m it draws half the current of a 12 V strip (I = P / V), so less voltage is lost along the run. For longer lines, feed each section separately or from both ends, and size the constant-voltage LED driver so the load is no more than 80 % of its rated power.
Which colour temperatures and IP ratings does the AS2835-24V-120-8mm come in?
Eight colour temperatures: 2200K, 2700K, 3000K, 3500K, 4000K, 4500K, 5000K and 6500K. It can be ordered as IP20, IP54, IP65, IP67 or IP68; the rating belongs to the finished construction (coating, silicone tube or solid silicone extrusion, end caps and cable exit), not the bare board. It bends to a 60 mm radius and has a 116.7° beam angle.
Another question about this product?
Send us the project details and our team will answer with the datasheet and a sample offer.