What is the difference between the AU1010S and AU1010T neon?
The bend direction. AU1010S is the side-bend model, so it bends horizontally, while the AU1010T is the top-bend model and bends vertically. Both are 10 × 10 mm, 10 W/m, 24 V DC and CRI > 90 with a 75 mm bend radius. The AU1010S gives less light, 773 lm/m at 3000K against 1016 lm/m, and it has no RGB version.
How tight can the AU1010S bendable neon bend?
Down to a 75 mm bend radius, horizontally, since the S in AU1010S stands for side bend. Plan the curves before fixing: each piece can be cut only at the marked cut points every 50 mm, standard lengths run from 1004 to 5004 mm, and one run reaches 5 m at most. The beam angle is 115.8° (average, 50%).
Which colours does the AU1010S LED neon strip light come in?
Single colour in 2200K, 2700K, 3000K, 3500K, 4000K, 4500K, 5000K and 6500K, and tunable white from 2700K to 6500K, all at CRI > 90 and SDCM < 3. Single-colour output runs from 585 lm/m at 2200K to 852 lm/m at 5000K at 10 W/m. There is no RGB AU1010S; for RGB in the same size, use the top-bend AU1010T.
Is the AU1010S neon flex waterproof?
Yes, it is rated IP65 / IP67. The rating belongs to the finished construction, so it holds only with the chosen cable exit (front, side, bottom or closed end) and sealed end caps; the silicone or integral end cap is listed for IP67. A cut end must be resealed to keep the rating. IP covers dust and water, not impact (IK) or UV.
Another question about this product?
Send us the project details and our team will answer with the datasheet and a sample offer.