How does the FL1010A flexible neon bend?
In three dimensions. The FL1010A from the Flexa line bends in every direction rather than in one plane only, so it can be formed into free curves and shapes, with a 75 mm bend radius. Top-bend and side-bend LED neon flex such as Aurora bends one way only, so Flexa is the choice when one run has to curve both ways.
What are the FL1010A neon flex LED light's specifications?
It is 10 × 10 mm, 10 W/m on 24 V DC, with CRI > 90, SDCM < 3 and a 116.1° (average, 50%) beam. It is rated IP65 / IP67, comes in 1004 / 2004 / 3004 / 4004 / 5004 mm lengths and carries a 3-year warranty. Listed certifications are TÜV Rheinland, CE, CB, cULus Listed (E488331), SAA, RoHS and LM-80.
What colours and output does the FL1010A offer?
Single colour only, in 2200K, 2700K, 3000K, 3500K, 4000K, 4500K, 5000K and 6500K. Output runs from 704 lm/m at 2200K to 1025 lm/m at 5000K, where efficacy is 103 lm/W; 3000K gives 930 lm/m at 93 lm/W. In the Flexa line, tunable white, RGB and RGBW come only on the larger FL2020A (20 × 20 mm).
Can the FL1010A be cut, and how far can it run?
Yes, at the marked cut points every 50 mm, and a cut end must be resealed to keep the IP65 / IP67 rating. One run reaches 5 m, so longer lines are built from several runs, each with its own feed. Power it from a 24 V constant-voltage LED driver sized so the load stays at or below 80 % of its rated power.
Another question about this product?
Send us the project details and our team will answer with the datasheet and a sample offer.