Skip to content

Aurora LED Neon Flex

AU1010T FAQ

10 × 10 mm top-bend neon at 10 W/m, 24 V DC, CRI > 90, in single colour 2200–6500 K, tunable white 2700–6500 K and RGB.

What is the AU1010T LED neon flex?

AU1010T is a 10 × 10 mm top-bend LED neon flex from the Aurora line that shows a continuous line without visible LED dots. It runs at 10 W/m on 24 V DC with CRI > 90 and SDCM < 3, in single colour from 2200K to 6500K, tunable white 2700–6500K and RGB. It is rated IP65 / IP67 and carries a 3-year warranty.

Which way does the AU1010T flexible LED neon bend?

Vertically. The T in AU1010T stands for top bend, and the bend radius is 75 mm. For horizontal bending, the side-bend twin is the AU1010S, with the same 10 × 10 mm size, 10 W/m, 24 V DC and 75 mm bend radius. Choose the bend direction from the way the line has to curve on site, since one piece bends in one direction only.

How bright is the AU1010T neon flex?

Single-colour AU1010T gives 769 lm/m at 2200K up to 1120 lm/m at 5000K, all at 10 W/m. Efficacy peaks at 112 lm/W at 5000K, and 3000K gives 1016 lm/m at 102 lm/W. Tunable white gives 821 lm/m across 2700–6500K, and RGB 292 lm/m with all channels on. The beam angle is 116.6° (average, 50%).

Where can you cut the AU1010T, and how long can one run be?

Only at the marked cut points, every 50 mm, and each cut end must be resealed with a silicone or integral end cap to keep the IP65 / IP67 rating. One run reaches 5 m, the model's maximum, and standard lengths are 1004 / 2004 / 3004 / 4004 / 5004 mm. Cable exits are front, side, bottom or closed end.

More product questions

Another question about this product?

Send us the project details and our team will answer with the datasheet and a sample offer.