Skip to content

CUPOWER Constant Voltage Driver

CUPOWER Linear SELV 5CH CS Constant Voltage Series FAQ

60 W, 24 V constant-voltage driver with integrated Casambi wireless and 5-channel PWM, 2.5 A shared across channels.

Can the CUPOWER 5CH CS driver run an RGBW or RGB LED strip?

Yes, for 24 V strips: it has five PWM output channels on a 24 V constant-voltage output, so one channel can drive each colour of an RGB, RGBW or RGB+CCT strip. The model is ID ECSVI 60/230/24 5CH CS (Art. No. 680064), rated 60 W. Confirm the channel layout of the strip with Artcolor when you order.

How is the ID ECSVI 60/230/24 5CH CS driver dimmed?

It dims over Casambi, a Bluetooth mesh network, which is built into the driver, so no separate wireless receiver is listed. Each of its five channels is dimmed by PWM while the output stays a constant 24 V. Input is 220–240 VAC and protection is IP20, so it belongs indoors or inside an enclosure.

How much LED strip can the 5CH CS driver power?

Up to 60 W in total, because its 2.5 A output is shared across all five channels rather than given to each. By I = P / V, 60 W at 24 V is 2.5 A. Sized with about 20 % headroom, plan for about 48 W, or 2 A, as the sum of all channels at full brightness, worked out from the strip's watts per metre and length.

More product questions

Another question about this product?

Send us the project details and our team will answer with the datasheet and a sample offer.