Skip to content

CUPOWER Constant Voltage Driver

CUPOWER Constant Voltage DT6 CU Series FAQ

24 V constant-voltage drivers, 40–240 W, with DALI-2 DT6 and push dimming for built-in or independent mounting.

What is the CUPOWER DT6 CU series DALI driver?

It is a 24 V constant-voltage LED driver that dims over DALI-2 (DT6) or by push dimming. Four models cover 40 W, 80 W, 160 W and 240 W: CU-DT6-24-40-220...240-CH, CU-DT6-24-80-220...240-CH, CU-DT6-24-160-220...240-CH and CU-DT6-24-240-220...240-CH. Input is 220–240 VAC or 220–240 VDC, protection is IP20, and each driver suits built-in or independent mounting.

What is the difference between DALI-2 DT6 and DT8 on CUPOWER drivers?

DT6 dims a single-colour strip; DT8 also changes colour temperature. The CUPOWER DT6 CU series dims a 24 V strip over DALI-2 DT6 or push dimming, while the DT8 CU series adds tunable white over DALI-2 DT8, or push CCT from a push button. For a tunable white strip on DALI, specify DT8 gear, or the run may dim without changing colour temperature.

Can the DT6 CU series dim an LED strip without a DALI system?

Yes, it also supports push dimming, so a push button can dim the strip where no DALI-2 controller is installed. The output stays a constant 24 V for 24 V LED strips, and the same driver can later join a DALI-2 DT6 installation. Match the driver output to the strip's rated 24 V input before choosing a model.

Which DT6 CU model does a 24 V DC LED strip need?

Choose the model whose rating keeps the strip load at or below about 80 % of it. That gives about 32 W on the 40 W model (0–1.67 A), 64 W on the 80 W (0–3.33 A), 128 W on the 160 W (0–6.67 A) and 192 W on the 240 W (0–10 A). Work out the load from the strip's watts per metre times its connected length.

More product questions

Another question about this product?

Send us the project details and our team will answer with the datasheet and a sample offer.