Is the AW2835-24V-60-8mm a bendable LED strip?
Yes. It is a Wave strip with an S-shaped, zigzag board that bends sideways (side bend, in the plane of the board), so it follows curves, arches, lettering and curved mouldings. It carries 60 2835 LEDs per metre on an 8 mm board at 24 V and 12.0 W/m, with CRI > 90 and SDCM < 3.
How tightly can the AW2835-24V-60-8mm bendable LED tape bend?
To a 30 mm radius, half the 60 mm minimum radius of most Artcolor strips. Wave strips are also made at 12 V and with 120 LEDs per metre, all with the same 30 mm radius. For a curved run inside a profile or channel, check that the profile itself can follow the same radius.
Where can the AW2835-24V-60-8mm be cut, and how long can one run be?
Every 100 mm, at the marked cut points, which is six LEDs per segment. One run can be up to 5 m; at 12.0 W/m that is 60 W, or 2.5 A at 24 V, so a 24 V constant-voltage driver of about 75 W or more keeps the load at 80 % of its rating. A cut waterproof version must be resealed.
Which colour temperatures and how much light does the AW2835-24V-60-8mm give?
Eight whites from 2200K to 6500K: 901 lm/m at 2200K, 1110 lm/m at 2700K, 1181 lm/m at 3000K, 1236 lm/m at 3500K, 1222 lm/m at 4000K, 1215 lm/m at 4500K, 1248 lm/m at 5000K and 1206 lm/m at 6500K, all at 12.0 W/m and CRI > 90. Its beam angle is 116.6°, and IP20 to IP68 versions are available.
Another question about this product?
Send us the project details and our team will answer with the datasheet and a sample offer.