Skip to content

SubRay Linear In-Ground Light

SubRay90 FAQ

90 × 110 mm stainless-steel in-ground linear light in 300, 500 and 1000 mm lengths at 50 W/m, 24 V DC, CRI > 90, in 4000K and RGBW.

What is the SubRay90 in-ground LED light?

SubRay90 is a stainless-steel linear in-ground light, 90 × 110 mm (W × H), in 300, 500 and 1000 mm lengths. It runs at 50 W/m on 24 V DC in 4000K or RGBW, with CRI > 90 and SDCM < 3, is rated IP66 and carries a 3-year warranty. Beam options are 15°, 30°, 45° and 10° × 60°.

Can SubRay90 wash a wall or landscape from the ground?

Yes — it is set into the ground and washes light up walls, façades and sculptures. At 50 W/m in 4000K it gives 2800 lm (15°), 2900 lm (30°), 2650 lm (45°) or 2700 lm (10° × 60°); the RGBW version gives 1450 to 1600 lm for colour washing. The 15° optic suits tall surfaces, and the 10° × 60° is narrow in one plane and wide in the other.

How do I power a SubRay90 run?

With a 24 V DC constant-voltage LED driver sized with about 20 % headroom. SubRay90 draws 2.08 A/m (I = P / V at 50 W/m), so three 1000 mm units draw 150 W and 6.25 A and need a driver of at least 188 W. At this current voltage drop builds up quickly, so keep low-voltage cables short or feed units separately; the data gives no maximum run, so confirm long runs with Artcolor.

Is the IP66 rating of SubRay90 enough for an in-ground installation?

Yes, with drainage. IP66 protects the sealed fitting against dust and powerful water jets, but it is not an immersion rating, so the ground pocket must drain and the light should never stand in water. IP also says nothing about impact or load: the data gives no IK or load-bearing rating, so confirm with Artcolor before placing SubRay90 where people walk or vehicles drive over it.

More product questions

Another question about this product?

Send us the project details and our team will answer with the datasheet and a sample offer.