Skip to content

GlowBar Direct View LED Pixel Bar

GlowBar40 FAQ

56 × 81 mm direct-view pixel bar in 400, 600 and 1200 mm lengths at 32 W per 1200 mm, 100–277 V AC, CRI > 90, in 4000K and RGBW.

What is the GlowBar40 pixel light bar?

GlowBar40 is a direct-view linear LED pixel bar in aluminium and solid acrylic: the lit acrylic face is seen directly, for intense, saturated colour. It measures 56 × 81 mm (W × H) with a 40 mm wide lens, comes in 400 / 600 / 1200 mm lengths, and is made in 4000K and RGBW, rated IP66, for wall or ground mounting.

What power does the GlowBar40 need?

It runs on 100–277 V AC, drawing 32 W per 1200 mm with a supply current of 0.145 A per 1200 mm. For a low-voltage installation, the GlowBar28 is the 24 V DC model of the line, in 250, 500 and 1000 mm lengths. Both carry a 3-year warranty and the same CRI > 90 and SDCM < 3.

What beam angles and output does the GlowBar40 have?

Two beams, 110° × 130° and 110° × 170°. Per 1200 mm at 32 W, the 4000K version gives 1376 lm at 43 lm/W with 110° × 130° and 1408 lm at 44 lm/W with 110° × 170°. The RGBW version gives 768 lm and 800 lm. Peak intensity runs from 253 cd to 465 cd.

How is GlowBar40 pixel lighting controlled?

That is confirmed per project with Artcolor. The product data lists GlowBar40 as a direct-view pixel bar in RGBW for dynamic colour, but it does not state the control protocol or the number of pixels per bar. Confirm both, and test the actual controller on a sample bar, before the lighting content is built.

More product questions

Another question about this product?

Send us the project details and our team will answer with the datasheet and a sample offer.