Skip to content

Aluminium LED Profile

AL-1616D FAQ

AL-1616D is a corner anodised aluminium LED profile, 16 × 16 mm, with a 10.6 mm channel for 8 mm LED strip. Extruded from 6063-T5 aluminium and anodised in silver, black or white (bronze, titanium gold, rose gold and silver grey to order), it comes in 1, 2.5, 3, 4, 5 and 6 m lengths, cut to order, with a push-in clear, diffuser, opal or black cover and matching end caps.

What is the AL-1616D corner LED channel?

The AL-1616D is a corner aluminium LED profile (LED channel), 16 × 16 mm, with a 10.6 mm channel for 8 mm LED strip. It is made for corner mounting. It comes in 1, 2.5, 3, 4, 5 and 6 m lengths, cut to order, with matching end caps.

Is the AL-1616D a 45 degree LED channel?

It is a corner profile with a square 16 × 16 mm section, made to sit in a corner. The data does not state a face angle in degrees, so the exact angle is shown on its section drawing and confirmed on request; contact Artcolor. For a larger corner channel, the AL-1919F is 18 × 18 mm with a 12.3 mm channel for 8 mm strip.

What is the AL-1616D aluminum LED channel made of?

It is extruded from 6063-T5 aluminium and anodised. Standard finishes are silver, black and white, and bronze, titanium gold, rose gold and silver grey are made to order. The anodised finish is the visible surface of the profile, so choose it to match the joinery or trim it sits beside.

Which covers fit the AL-1616D LED profile?

It takes a push-in clear, diffuser, opal or black cover. Light transmission is 90–95% for clear, 70–80% for diffuser, 65–75% for opal and 50–55% for black. Opal and diffuser covers soften the view of the LEDs in a corner that is seen directly, at a cost in light output.

More product questions

Another question about this product?

Send us the project details and our team will answer with the datasheet and a sample offer.