Why use a 48 V COB LED strip like the ABCOB-48V-480-10mm?
For long runs. At the same power, the higher voltage means a lower current (I = P / V): half that of 24 V and a quarter that of 12 V, so there is less voltage drop and long lines need fewer feed points. The ABCOB-48V-480-10mm has 480 chips per metre on a 10 mm PCB at 48 V DC, with a 180° beam.
How far can the ABCOB-48V-480-10mm run?
Artcolor confirms the maximum run length for each project's power and feed points. As a general guide, a 48 V strip reaches further than the 8–10 m of a single-end feed at 24 V, and feeding from both ends or the middle nearly doubles the length. Its reel length is 5 m.
Which colours does the 48 V COB strip ABCOB-48V-480-10mm come in?
White in 2700K, 3000K, 4000K and 6500K, all at Ra > 90. Each has its own product code, from ABCOB27904848010S15 at 2700K to ABCOB65904848010S15 at 6500K. The light shows as a continuous, dotless line, so it suits long architectural lines that are seen directly or in reflections.
What driver and IP rating does the ABCOB-48V-480-10mm need?
A 48 V constant-voltage LED driver, sized so the strip's load is no more than 80 % of its rating; power depends on the configuration and is confirmed in the quotation. It can be ordered in IP20, IP54, IP65, IP67 or IP68. The rating belongs to the finished construction, and IP covers dust and water, not impact or UV.
Another question about this product?
Send us the project details and our team will answer with the datasheet and a sample offer.