Skip to content

COB LED Strip

ABCOB-24V-480-8mm Single Colour COB Strip FAQ

Single-colour COB strip on an 8 mm PCB at 24 V: 480 chips per metre under one continuous phosphor line, in white from 2700K to 6500K at CRI > 90 or in seven solid colours.

What is a COB LED strip like the ABCOB-24V-480-8mm?

A COB (chip-on-board) strip carries bare LED chips directly on the flexible PCB under one continuous layer of phosphor, so it lights as an unbroken line with no visible dots. The ABCOB-24V-480-8mm has 480 chips per metre on an 8 mm PCB at 24 V, with a 180° beam and a reel length of 5 m.

COB vs SMD: is the ABCOB-24V-480-8mm always the better choice?

No. COB is the choice when the visible light line matters, for example in shallow profiles, display cases, shelves and reflective surfaces seen close up. An SMD strip can be better when a project needs a particular LED package, a set efficacy, a specific optic or a certification tied to an existing SMD model. Compare both against the same specification and approve a lit sample first.

Which colours does the ABCOB-24V-480-8mm come in?

White in 2700K, 3000K, 4000K and 6500K at Ra > 90, or seven solid colours: red, green, blue, yellow, orange, pink and ice blue. Each has its own product code, for example ABCOB30902448008S15 for 3000K white. The standard PCB is 8 mm, with 5 mm and 10 mm on request.

Why choose the 24 V ABCOB-24V-480-8mm over a 12 V COB strip?

For longer runs. At the same power, 24 V draws half the current of 12 V (I = P / V), so there is less voltage drop. As a general guide, a single-end feed reaches about 8–10 m at 24 V against about 5 m at 12 V, and feeding from both ends or the middle nearly doubles that. The 24 V strip cuts every 50 mm, the 12 V one every 25 mm.

How is the ABCOB-24V-480-8mm cut and connected?

Cut it only at the marked cut points, every 50 mm. Join it with the AE-S-SC-2PIN-8MM-A / -B / -C / -D / -T / -L clip connectors or by soldering lead wires to the copper pads. It is available in IP20, IP54, IP65, IP67 and IP68; a cut waterproof strip must be resealed to keep its rating.

More product questions

Another question about this product?

Send us the project details and our team will answer with the datasheet and a sample offer.