What is the AC-2102 LED sheet roll and how big is it?
The AC-2102-2824-1056 is a flexible LED sheet (flexible LED panel) supplied as a 10 m × 240 mm roll. It carries 1,056 Lumileds SMD2835 LEDs per metre on a double-layer flexible PCB, draws 48 W/m at 24 V DC and gives tunable white from 2700–6500 K at CRI > 90, 95 lm/W and a 120° beam angle. It is rated IP20 and operates from −25 to +60 °C.
Is the AC-2102 roll suitable for backlighting long onyx walls or panels?
Yes, it is made for long backlit walls and counters. The LEDs sit on a regular grid across the 240 mm width, so onyx, marble or acrylic lights evenly instead of showing lines, and the 10 m roll covers a long wall with fewer joints than separate sheets. The warm 2700 K and cool 6500 K channels are mixed by a CCT controller. Test a sample behind the actual stone, as its thickness decides the depth needed.
Can the AC-2102 LED sheet roll be cut to length?
Yes, along the marked lines between cut units, each 20.8 × 21.8 mm and holding 2 LEDs. That lets the roll be trimmed to the length and shape of the opening. Every separate piece needs its own power feed, so plan the cut layout and the cable entries before cutting, and cut only at the marked lines.
What driver does a 10 m AC-2102 roll need?
A 24 V constant-voltage driver, sized with about 20 % headroom. At 48 W/m the full 10 m roll draws 480 W, or 2 A/m by I = P / V. At 80 % load a MEAN WELL LRS-350-24 runs 5.8 m and an HLG-320H-24 runs 5.3 m, so feed a full roll in two sections, each from its own driver.
What comes in the AC-2102 LED sheet kit?
Each 10 m AC-2102 roll comes with 2 × 500 mm and 2 × 65 mm connector leads, 80 silicone bumpers, 160 screws with washers and a screwdriver. The leads join sections without soldering, the bumpers keep a set distance from the surface in front, and the sheet can be fixed with its adhesive backing or with screws through the fixing holes.
Another question about this product?
Send us the project details and our team will answer with the datasheet and a sample offer.