4 min readBy Artcolor
What is linear LED lighting? Types and uses explained
Linear LED lighting draws light in continuous lines instead of points. The main types, from LED strips in profiles to neon, wall washers and in-ground lights, and where each is used.

Linear LED lighting is lighting made of continuous lines instead of points. Where a downlight or a spotlight puts a pool of light in one place, a linear light spreads it along a length: under a shelf, around a cove, up a wall or along the edge of a building. In architecture the line itself is often part of the design.
Types of linear LED lighting
| Type | What it is | Typical use |
|---|---|---|
| LED strip in a profile | A flexible LED strip in an aluminium channel with a cover | Coves, shelves, joinery, recessed lines |
| COB LED strip | A strip whose chips sit under one continuous coating | Visible lines and shallow profiles with no dots |
| LED neon flex | LEDs in a diffusing body that shows one even line | Signs, outlines, curves, bars |
| Linear wall washer | A rigid fixture with optics that spreads light up or down a wall | Façades, gallery and lobby walls |
| Flexible wall washer | A wall washer that bends to curved walls and columns | Curved façades, columns, artwork |
| Linear in-ground light | A sealed fixture set into the floor or ground | Uplighting walls, paths and façades |
| Pixel bar | A short bar of individually controlled colour pixels | Media façades and colour effects |
Artcolor linear lighting
Artcolor makes each of these types:
- Flexible LED strips in nine series on 12, 24 and 48 V, and the dotless COB Series.
- Aluminium profiles for 5 to 16 mm strips: surface, recessed, plaster-in, corner, suspended, in-ground and wall washer, with clear, diffuser, opal or black covers.
- LED neon flex in five series: Aurora, Flexa, Titan, Vanish and Omni.
- Linear wall washers: the slim aluminium Link range in five sizes.
- Flexible wall washers: Lumea and Kello, which bend to a 75 mm radius, and the modular MechFlex.
- Linear in-ground lights: SubRay, in stainless steel, rated IP66.
- Direct-view pixel bars: GlowBar, in 4000K or RGBW.
Where linear lighting is used
- Hotels and residences: coves, headboards, stairs and joinery, for soft indirect light.
- Retail and display: shelves, cabinets and showcases, lit along their length.
- Galleries and museums: even washes on walls, and lines that guide the way.
- Shopping malls and lobbies: balcony edges, ceiling lines and feature walls.
- Façades and landscape: outlines, wall washing and in-ground uplighting.
Specifying a linear light
- Decide what the line does. Is the line seen, or does it light a surface? A seen line needs an even look (a COB strip or neon, or a strip behind a diffuser); a lit surface needs the right beam (a wall washer).
- Choose the light. Colour temperature, CRI and how closely the whites match from reel to reel. See why two 3000K strips don't match.
- Choose the housing. Profile depth, cover and mounting decide whether the LEDs show and how the heat leaves. See how to choose an LED strip channel.
- Plan power and control. Voltage, run lengths, feed points, drivers and dimming. See choosing 12 V, 24 V or 48 V.
- Check the protection. Outdoors and in wet areas, the whole construction needs the right IP rating, not just the light.
The linear lighting spec checklist goes through each point in more detail.
Linear LED lighting FAQ
What is linear LED lighting?
Lighting made of continuous lines of light rather than single points. It covers LED strips in profiles, COB strips, LED neon flex, linear and flexible wall washers, linear in-ground lights and pixel bars.
What is the difference between linear lighting and an LED strip?
An LED strip is one kind of linear light: a flexible circuit board with LEDs along it. Linear lighting is the wider family, which also includes neon flex, wall washers, in-ground lights and pixel bars.
Where is linear lighting used?
In coves, shelves, cabinets and joinery; along stairs, handrails and ceilings; on gallery, lobby and façade walls; and outdoors in the ground or along building edges.
How do I hide the LED dots in a linear light?
Use a deeper profile with a diffuser or opal cover, a denser strip, or a COB strip, which shows a continuous line without dots. See avoiding LED dots in reflections.
Can linear LED lighting be used outdoors?
Yes, with outdoor-rated products and connections: strips, neon and wall washers in IP65 to IP68 versions, IP66 in-ground lights, and drivers and connectors protected for the location.
Planning linear lighting?
Send us the drawings or photos and tell us what each line should do, and we will suggest the products to sample. Contact us, or see our solutions by application.
- Guides
- Linear lighting
- Architectural lighting
