Skip to content

COB LED Strip

Continuous, dotless light on a flexible strip.

Artcolor COB LED strips carry bare LED chips directly on the flexible PCB under one continuous layer of phosphor, so the strip lights as an unbroken line with no visible dots, even close up or in shallow profiles. Eight models in single colour, tunable white, RGB, RGBW, RGBCCT, addressable SPI and 48 V for long runs, all with a 180° beam. Power and luminous flux depend on the configuration and are confirmed in each quotation.

Guide: what is a COB LED strip?

View 8 products
COB LED Strip

Series overview

Models
ABCOB-24V-480-8mm, ABCOB-12V-480-8mm, ABCOB-24V-576-10mm, ABCOB-48V-480-10mm, ABCOBRGB-24V-840-10mm, ABCOBRGBW-24V-840-12mm, ABCOBRGBCW-24V-840-12mm, ABCOBSPI-24V-720-10mm
Light colours
Single colour, tunable white, RGB, RGBW, RGBCCT, addressable RGB (SPI)
Chip density
480 – 840 chips/m
PCB width
8, 10 and 12 mm
Voltage
12, 24 and 48 V DC
Beam angle
180°
CRI
Ra > 90 (white light)
Cut unit
25 mm at 12 V, 50 mm at 24 V
IP rating
IP20 / IP54 / IP65 / IP67 / IP68
Reel length
5 m

White Light

Colour Changing

Why specify COB LED Strip

Dotless light line

The chips sit under one continuous phosphor layer, so an exposed or reflected light line shows no LED points.

Shallow profiles

Needs little distance to the diffuser, so the line stays smooth in slim and shallow aluminium profiles.

Close-view details

For display cases, shelves, cabinets and architectural details that are seen from a short distance.

Approve a lit sample

Dotless is a visual result: check a lit sample in the intended profile, diffuser and viewing distance before ordering.

Applications

Art Gallery
Art Gallery
Museum Showcase
Museum Showcase
Luxury Hotel Corridor
Luxury Hotel Corridor
Fine Dining Wine Wall
Fine Dining Wine Wall
Shopping Mall Lighting
Shopping Mall Lighting
Architectural Lighting
Architectural Lighting

Questions

Which COB strip should I choose?

Single colour for one fixed white or colour; tunable white to adjust the colour temperature; RGB, RGBW and RGBCCT for colour mixing with a controller; addressable SPI for chases and pixel effects; and the 48 V model for long runs.

Is a COB strip always better than an SMD strip?

No. COB is the choice when the visible light line matters. An SMD strip can be better when a project needs a particular LED package, a set efficacy, a specific optic or a certification tied to an existing SMD model. Compare both against the same specification before sampling.

How are COB strips cut and connected?

Only at the marked cut points: every 50 mm at 24 V and every 25 mm at 12 V on the single-colour strips. Join them with the matching Artcolor clip connectors or by soldering lead wires to the copper pads, and plan the feed points for the total run length.

What can be customised?

Depending on the model: voltage, light colour or CCT, CRI, PCB width, chip density, cut length, IP construction, connectors, reel length and private-label packaging.

Are samples available?

Samples are available for qualified B2B projects after a review of the model and the project. Cost, freight, configuration and lead time are confirmed before shipment.

Need a custom COB LED Strip?

Voltage, CCT, CRI, PCB width, IP construction, reel length and packaging are configured per project. Send us your application and we will recommend a model and prepare samples.